Brick repair and replacement in Chicago
Brick repair in Chicago usually means cutting out the bricks that have spalled, cracked or come loose and toothing in replacements that match, without disturbing the sound wall around them. We salvage Chicago common brick for exactly this. More important, we find out why those bricks failed, because a replacement in the same wet spot fails the same way.
Most brick in Chicago will outlast all of us. When individual bricks fail, there's almost always a reason: water from somewhere specific, mortar that's harder than the brick, rusting steel inside the wall, or a coating that traps moisture. Fix the reason and replace the bricks, and the repair should outlast the rest of the wall.
The brick damage we see most
Matching old Chicago brick
Chicago common brick was made from local lake clay, and its color varies from salmon pink to buff to reddish orange, sometimes in a single wall. It's also softer than modern brick. A new brick from a supplier rarely matches in color, texture or size, and a harder brick in a soft wall concentrates the stress around it.
So we work from salvage: reclaimed Chicago common brick from demolitions, or, for a perfect match on a front wall, bricks taken from somewhere hidden on your own building, like the inside of a garage wall or below a porch, with the hidden spot filled with new brick. Face brick on fronts is easier: many 1920s face brick colors still have close matches from brick suppliers, or we find reclaimed ones.
How we replace damaged brick
- Cut out the mortar around the brick with a grinder and plugging chisel.
- Break out the brick in pieces, working from the middle so the neighbors don't crack.
- Clean the cavity and dampen it.
- Butter the replacement brick and the cavity with matched mortar and slide it in.
- Pack the joints full and tool them to match the wall.
- Repoint surrounding joints if they're tired too, so the patch doesn't stand out.
When a wall is bulging
A bulge or bow in a brick wall is more serious than loose bricks. On solid multi-wythe walls (two or three bricks thick, common in older Chicago buildings) the outer layer can separate from the inner ones when the header bricks tying them together fail. Sometimes the bulged area can be rebuilt with new ties; sometimes it needs an engineer. In Chicago, replacing the outer wythe of a wall is covered by the Express Permit Program, while rebuilding all wythes needs a plan-reviewed permit. Our Chicago permit guide explains where that line falls.
The rusting steel lintel is the single most common cause of cracked brick we see around Chicago windows. Rust takes up several times the volume of the steel it came from, so it lifts the brick above it. If your cracks start at a window corner, read our lintel replacement page before paying for brick work alone.
Painted brick and spalling
Paint on old brick is a common cause of spalling. Most modern paints don't let water vapor out, so moisture builds up behind the film, freezes and pops the face off with the paint attached. If your painted brick is peeling with chunks of brick on the back of the flakes, stripping and repointing is often the long-term answer. A breathable mineral (silicate) paint is an option if you want the painted look. We'll talk through it on site; there's no single right answer for every wall.
What brick repair costs
Replacing individual bricks typically runs $35 to $75 per brick in small quantities, less per brick on bigger patches, with a minimum visit charge. Larger sections are often priced per square foot. Bulged sections and wythe rebuilds are quoted after a closer look. See the cost guide and estimator for how brick work adds onto a repoint.
Brick repair questions
Can you match old Chicago common brick?
Usually, with salvaged Chicago common brick from demolitions or from a hidden part of your own building. New brick rarely matches the soft, varied salmon and buff tones, so we keep salvage on hand and source more for big jobs.
Why are the faces popping off my bricks?
That's spalling. Water gets into the brick, freezes and pushes the face off. The usual causes are hard cement mortar, a non-breathable sealer or paint, or water from a gutter, downspout or bad crown soaking one area.
Can I just flip a spalled brick around?
Sometimes. On some old walls we remove a spalled brick and re-lay it with the sound back face out. It only works if the back is clean and the right size, and only after fixing what caused the spalling.
Related: brick repair usually goes hand in hand with tuckpointing, and the worst spalling is often on chimneys and parapets. We do brick repair across Chicago and in Oak Park and Skokie.
More Field Notes
Free estimate
Bricks cracking or falling out?
Send us the address and a quick description. We'll find what's causing it and price the fix.
Rather talk it through? Call us.