Free written estimates in Chicago and the near suburbs

Chicago Tuckpointing Co.Tuckpointing · Chimneys · Brick

Tuckpointing cost in Chicago

Tuckpointing cost in Chicago usually lands between $10 and $18 per square foot for a full grind-and-repoint on a wall you can reach from the ground, and more when it takes tall ladders or scaffold. Spot repairs on a bungalow often run $800 to $2,500. Below are our current ranges for each kind of masonry work, what moves the number, a worked example and an estimator you can try with your own wall.

Updated November 20, 2026

These are the ranges we work from in Chicago and the near suburbs. Every building is priced after we've looked at it, and the written estimate will show the same line items as below, so you can see where your number came from.

Tuckpointing cost estimator

How much of the wall?
How high is the work?
–

Pick a wall to start.

Get an exact written price

Chicago masonry price table

WorkTypical rangeNotes
Full repoint, ground-reachable wall$10–$18 per sq ftGrind 2–2½× joint width, matched mortar
Tall ladders or pump jacksabout +20%Bungalow gables, 1½-story walls
Scaffold or liftabout +40–45%Two-flats, three-flats, gangway walls
Spot tuckpointing$800–$2,500 typical bungalowRoughly a third of the full-repoint price per wall
Lime or custom-matched mortarabout +25%Landmark and 19th-century brick
Brick replacement$35–$75 per brickLess per brick on larger areas
Steel lintel replacement$1,100–$2,400 per openingUp to about 6 ft span
Chimney repoint above roof$900–$2,200Sound brick, plumb stack
Chimney crown and cap$550–$1,400Formed crown with drip edge
Chimney rebuild above roofline$3,800–$8,500Height, pitch and flues drive it
Parapet rebuild$150–$350 per linear ftCoping reset alone: $40–$90 per ft
Breathable water repellent$1.25–$2.75 per sq ftOnly on sound, repointed walls
Permit filing and fees$150–$450Varies by city and job size
Minimum job$650Small repairs, single visit

What moves the price

Height and access

This is the biggest one. The same 500 square feet of wall costs much more on the third floor of a gangway than at eye level on a garage. Scaffold has to be hauled in, set up, sometimes permitted on the public way, and taken down. When several jobs share one scaffold setup (a full side wall, its lintels and the parapet above), the access cost is spread out, which is why we often suggest doing one whole elevation at a time.

Joint width and condition

Wide joints take more mortar and more passes; very thin joints (like greystone limestone) take more careful hand work. Walls previously repointed with hard cement mortar take longer to grind out without damaging the brick.

Mortar

Standard Type N mortar is the baseline. Lime mortars and custom color matching cost more in material and time, but on old soft brick they're the right call.

Gangways and neighbors

Chicago lots are narrow. A side wall three feet from the neighbor's building means smaller scaffolds, more protection and sometimes working from the neighbor's property with their permission.

Brown and grey brick wall with worn mortar joints
Joint condition varies across a wall. We price only the area that actually needs it.

Worked example: a Portage Park bungalow

A typical 1920s brick bungalow on the Northwest Side. Front face brick is in fair shape; the west side wall is badly eroded; the chimney crown is cracked; two lintels on the west side are lifting brick.

Line itemQuantityRange
Full repoint, west side wall, tall ladders700 sq ft × $12–$21.60$8,400–$15,100
Spot tuckpointing, east sideabout 120 sq ft$1,450–$2,600
Lintel replacement, west side2 openings$2,200–$4,800
Chimney crown and cap1$550–$1,400
Permit1$150–$450
Totalabout $12,750–$24,350

The front wall isn't on the list. It didn't need work yet, and we'd rather tell you that than add it. If the budget's tight, the west wall and the lintels come first; the east side can wait a season or two. Our bungalow masonry guide explains why the west and north walls go first.

What our price includes

  • Protection of windows, doors, AC units, plants and walkways
  • Dust-controlled grinding (shrouded grinders on HEPA vacuums)
  • Mortar matched to the brick in strength and color
  • Tooling to match your existing joint profile
  • Brushing off mortar smears and cleaning up the site, alley and gangway
  • Permit filing when the job requires one

Not included unless listed: interior plaster repair, roofing and flashing work beyond what's needed at the masonry, chimney liner work, and painting.

How to compare tuckpointing quotes

  1. Are the square feet the same? Ask each contractor how they measured.
  2. Is the grind-out depth written down?
  3. What mortar type, and why that one for your brick?
  4. Ladders or scaffold? A suspiciously cheap quote for a two-story wall often skips scaffold, which makes good work much harder.
  5. Is the contractor licensed to do masonry where you live, and who pulls the permit? In Chicago, ask for the mason contractor license number.
  6. What's the plan for the cause: the lintel, gutter or crown that made the damage?
Local specifics

In the City of Chicago, routine masonry repair including tuckpointing is permitted through the Department of Buildings' Express Permit Program, and the work must be performed by a Chicago-licensed mason contractor. Suburbs set their own permit fees. See our permit guide.

Ways to save on masonry work

  • Do one whole elevation at a time so scaffold is set up once.
  • Fix gutters and downspouts first; a dumping downspout can ruin new joints in a few years.
  • Book estimates in winter for spring work, before the April rush.
  • Skip sealers on sheltered walls. They're rarely worth it there.
  • Handle a few joints at eye level on a garage yourself, if you're handy. Our DIY vs hiring post covers how.

Cost questions

How much does it cost to tuckpoint a bungalow in Chicago?

Spot tuckpointing on a Chicago bungalow usually runs $800 to $2,500. A full repoint of one side wall is often $7,000 to $15,000, and the whole house, including the chimney, can reach $15,000 to $30,000 depending on height, access and condition.

Why do tuckpointing quotes vary so much?

Mostly because of what's included: grinding depth, mortar type, how many square feet are really being repointed, and whether scaffold is used. Compare quotes line by line, not just the total.

Is tuckpointing cheaper in winter?

Rarely. Winter work needs heated enclosures, which add cost. Booking early in the year for an April or September start is the best way to get on the schedule.

Next: see what each job involves on the tuckpointing, chimney and lintel pages, or check prices in Oak Park and Evanston, where landmark work adds to some jobs.

Free estimate

Want a real number for your wall?

We'll measure it, check the joints and send an itemized estimate, usually within two days of the visit.

Rather talk it through? Call us.

We call back within one business day to set up a look at the wall. We use your details only to answer you, and we never sell them.

Call us