Free written estimates in Chicago and the near suburbs

Chicago Tuckpointing Co.Tuckpointing · Chimneys · Brick

Steel lintel replacement in Chicago

Lintel replacement in Chicago is a job we do on almost every older brick building eventually. The steel angle over each window and door rusts, rust swells, and it lifts and cracks the brick above it. We remove the brick above the opening, replace the steel with new primed or galvanized steel, add flashing, and relay the brick to match. No amount of tuckpointing fixes that crack while the old steel is still in there.

Updated November 20, 2026

A lintel is the beam that carries the brick over an opening. On most Chicago bungalows, two-flats and apartment buildings from roughly 1900 to 1960, that's a plain steel angle iron sitting on the brick at each side of the window. It's out of sight, sitting in damp masonry for a hundred years, and sooner or later it rusts.

Why rusting lintels crack brick

When steel rusts, the rust takes up several times the space of the original metal. Layer by layer, the steel angle thickens. Since it's locked between courses of brick, the only way to grow is up, so it jacks the brick above it off its bed. This is sometimes called "rust jacking." The mortar joint right above the lintel opens first, then cracks run up and outward from the corners of the opening, often in a stair-step pattern.

How a rusting lintel lifts brickA window opening with a steel angle above it. Rust layers swell the steel, lifting the brick and causing stair-step cracks from the corners. windowrusting steel angleswells and liftsStair-step cracks run up from the corners of the opening.
Rust growing on the steel angle lifts the brick above, and cracks fan out from the window corners.

Signs of a failing lintel

  • A horizontal crack or open joint directly above the window head
  • Stair-step cracks rising from one or both upper corners
  • Rust stains running down the brick from the steel edge
  • Steel visibly flaking, bowed or delaminating in layers
  • Brick above the window bulging out or bricks loose at the ends of the steel
  • Windows that have started to bind (sometimes, if the frame is getting squeezed)
Window opening set into a brick wall
Every window and door in a brick wall has a lintel above it. On older buildings that's usually a plain steel angle.

Paint, repair or replace?

Not every rusty lintel needs replacing today. Here's how we decide:

ConditionWhat we recommend
Surface rust on the visible edge, no cracks, brick tightWire brush, rust-inhibiting primer and paint; seal the joint above with proper mortar. Recheck in a few years.
Some flaking, hairline crack above, brick not liftedJudgment call. On a sheltered first-floor window, paint and monitor. On a weather-facing side, plan replacement.
Layered rust, open joint, lifted or cracked brickReplace the steel and relay the brick above.
Lintel bowed or brick saggingReplace soon, and shore the opening while we work.

How we replace a lintel

  1. Shore the masonry above the opening if needed, so nothing drops while the steel is out.
  2. Remove the brick above the lintel, usually in a stepped pattern a few courses high, and save sound bricks for reuse.
  3. Take out the old steel and clean the bearing points at each end.
  4. Set new steel: galvanized or primed and painted, sized for the opening, with proper bearing at each end.
  5. Install flashing over the lintel with weep vents where the wall construction allows, so water that gets in has a way out. Many original lintels had none.
  6. Relay the brick in matched mortar, toothing the new work into the old so it disappears.
Local specifics

The City of Chicago's Express Permit Program covers replacing a lintel with a span of up to 6 feet as part of masonry work, and the work must be done by a Chicago-licensed mason contractor. Wider openings, like storefront and garage lintels, are handled differently. Our permit guide has the details.

Lintel replacement costs

Most window openings up to about 6 feet run $1,100 to $2,400 each, including the brick work above. Second- and third-floor windows on two-flats and courtyard buildings need scaffold or a lift, which adds cost, but that's shared if several lintels are done at once. Doing all the lintels on one elevation together with a full repoint of that wall is usually the best value. Price yours in the estimator.

Lintel questions

How much does lintel replacement cost in Chicago?

Usually $1,100 to $2,400 per window or door opening up to about 6 feet, including removing and relaying the brick above. Higher floors, wide openings and stone or decorative brick cost more.

Can a rusty lintel just be painted?

If the steel has only surface rust and the brick above hasn't cracked or lifted, cleaning and painting the exposed edge can buy years. Once rust has lifted the brick, the steel needs replacing.

Do I need a permit to replace a lintel in Chicago?

Replacing a lintel spanning up to 6 feet falls under Chicago's Express Permit Program for masonry work. Longer spans and structural changes need a different permit path.

Related: cracks from lintels often come with loose brick, see brick repair. Courtyard buildings and two-flats with dozens of openings are often phased together with parapet work. We replace lintels across the city and in Evanston, Oak Park and Park Ridge.

Free estimate

Cracks stepping up from your windows?

Tell us the address and roughly how many openings. We'll check each lintel and price only the ones that need it.

Rather talk it through? Call us.

We call back within one business day to set up a look at the wall. We use your details only to answer you, and we never sell them.

Call us