Free written estimates in Chicago and the near suburbs

Chicago Tuckpointing Co.Tuckpointing · Chimneys · Brick

Brick waterproofing in Chicago: when sealing helps and when it hurts

Brick waterproofing in Chicago is something we often talk people out of, not into. A breathable water repellent can help an exposed wall or chimney after it's been properly repointed. But a sealer over bad joints, or a film-forming coating on old soft brick, traps water inside and makes the brick faces pop off. Here's how we decide, and what to fix first.

Updated November 20, 2026

Brick walls aren't meant to be watertight. Old solid-masonry walls get wet in a storm and dry out afterward through the surface. Anything that stops that drying, whether paint, an acrylic sealer or hard cement mortar, changes how the wall handles water, and in Chicago's freeze-thaw winters that usually ends badly.

Fix these before thinking about a sealer

  1. Joints: open, recessed or cracked mortar lets in far more water than brick does. Repoint first.
  2. Gutters and downspouts: overflowing or dumping water on the wall.
  3. Tops of walls: chimney crowns, parapet coping and window sills with open joints or no drip edge.
  4. Flashing: at roofs, chimneys and over lintels. See lintels.
  5. Grading: soil or paving sloping toward the foundation.

Once those are right, most walls stay dry enough without any coating.

Types of masonry sealers

Product typeBreathable?Our view
Silane / siloxane penetrating water repellentYesThe only kind we apply to brick. Soaks in, repels liquid water, lets vapor out. Doesn't change the look much.
Acrylic or film-forming "sealer"Little or noneAvoid on old brick. Traps moisture, can turn shiny and peel, causes spalling.
Ordinary latex or oil paintLittleSame problem as film sealers. Common cause of spalling on painted Chicago brick.
Mineral (silicate) paintYesAn option when owners want painted brick; bonds with masonry and breathes.
Elastomeric coatingLittleNot for solid brick walls; we don't use it on masonry houses.
Weathered red brick wall in a running bond pattern
Old brick needs to dry out after it gets wet. A coating that stops that drying causes more damage than the rain.

When a water repellent makes sense

  • Chimneys above the roof, after repointing and a new crown
  • Parapets and walls facing the lake or prevailing weather, after repointing
  • Very porous brick that soaks up water visibly in a rain, with sound joints
  • Limestone sills and caps, using a product made for stone

We skip it on sheltered walls, on walls with interior moisture problems we haven't traced, and on landmark buildings unless preservation staff agree.

Testing before we seal

We test absorption on the wall before recommending anything, using a simple water-uptake tube held against the brick, and apply the product to a small test area first so you can see the look. If the wall doesn't absorb much water, we'll tell you it doesn't need a repellent.

Local specifics

Chicago common brick on the sides and backs of pre-war buildings is softer and more porous than modern brick, which is why coatings that trap water do so much damage here. On landmark buildings, coatings and cleaning go through the same Historic Preservation review as repointing. See masonry restoration.

Already painted or sealed?

Many Chicago walls were painted or coated decades ago. If the coating is intact and the brick behind it is sound, it can sometimes be left alone. If it's peeling with brick attached to the flakes, the coating is trapping water. The fix is careful removal with a stripper chosen for that coating, tested first, then repointing and leaving the brick to breathe. If you still want the painted look, a mineral silicate paint is the breathable option. Pressure washing at high pressure or sandblasting to remove paint damages old brick and is never our method.

What brick water repellent costs

A breathable silane or siloxane repellent typically runs $1.25 to $2.75 per square foot applied, depending on product, access and how many walls. It's usually added to a repointing job rather than done on its own. Try it in the estimator.

Waterproofing questions

Should I seal my brick house in Chicago?

Usually not the whole house. Sound brick with good joints sheds most water on its own. A breathable silane or siloxane repellent can help on exposed walls, chimneys and parapets after repointing. Never seal over bad joints.

How long does a brick water repellent last?

Penetrating silane and siloxane repellents typically last several years to around ten, depending on product and exposure. They wear gradually and can be reapplied once tests show water soaking in again.

Will a sealer stop my basement from leaking?

Rarely. Basement leaks usually come from grading, gutters, cracks or groundwater pressure, which an exterior brick sealer above grade won't fix.

Related: water coming through the wall? Start with our post on why brick walls leak, then see chimney repair and parapet repair.

Free estimate

Water getting through your brick?

Tell us where you see it. We'll trace the source and tell you honestly whether a sealer would help.

Rather talk it through? Call us.

We call back within one business day to set up a look at the wall. We use your details only to answer you, and we never sell them.

Call us